Shop Options:

3 Ton Insert Mounted Jib, 8' HUB, 8' Span

Price: $8,042.00

Model Number: FS350-6000-8-8

*Images may or may not be your exact model. Images are for reference only.

FS350 INSERT MOUNTED JIB CRANES
FS350S SLEEVE MOUNTED JIB CRANES
insert and sleeve mounted jib cranes
MAXIMUM VERSATILITY AND
PERFORMANCE

*Our most versatile crane. Perfect for
  underneath traveling cranes, in open
  areas where it can serve several work
  stations, in outdoor applications such
   as loading docks, or in machining and
  assembly operations where it can be
  overlapped with other jibs to provide
  staged operation.

EASE OF OPERATION

*Allows operators to position loads
  precisely, effortlessly and efficiently.

*Precision tapered roller bearings in top
  pivot and trunnion assemblies provide
  smooth operation and long life.
*Full supporting triangular base plate
  gussets are used (in lieu of struts) to
  minimize crane deflection, thus
  making it easier to accurately position
  loads.
SAFETY
Available in insert mounted (FS350) and sleeve insert mounted
(FS350S) styles

*Head retaining pin provides the
  resistance to accidental upward
  dislodgment of the head.

*Pre-engineered for use with powered
  hoists. A factor of 15% of the jib crane
  capacity is allowed for the hoist and
  trolley weight with an additional 25%
  of the capacity allowed for impact,
  thus giving maximum capacity use of
  the jib.
Pricing and Dimensional Specifications -
Click a Load Capacity Link Here
1/4 TON 1/2 TON 1 TON 1-1/2 TON 2 TON 3 TON 5 TON
POWER ROTATION
Is Optional
insert and sleeve mounted jib cranes insert and sleeve mounted jib cranes
360° ROTATION
PERFORMANCE FREE
STANDING JIB CRANES
MANUAL ROTATION

FS350 - INSERT MOUNTED
insert mounted jib cranes
Pricing and Dimensional Specifications - Click a Load Capacity Link Here
1/4 TON 1/2 TON 1 TON 1-1/2 TON 2 TON 3 TON 5 TON
Chart 1B. Boom Data
insert mounted jib cranes diagram
STANDARD BOOM DATA
Boom
Height (W)
Beam Size Flange
Width (in)
6" W6@12#/ft. 4"
8.125" W8@18#/ft. 5-1/4"
10.33" W10@26#/ft. 5-3/4"
12.5" W12@35#/ft. 6-1/2"
16.125" W16@45#/ft. 7"
18" W18@50#/ft. 7-1/2"
21" W21@62#/ft. 8-1/4"
24.125" W24@84#/ft. 9"

FS350S - SLEEVE MOUNTED
sleeve mounted jib cranes
Chart 2E. Stiffener Plate and Center Pin Cut-Out Requirements
Pipe Size (E) Footing Depth (L) Stiffener Plate Size (in. sq.) Center Pin Depth (in.)
8 36 6 15/16
8 48 6 15/16
12 36 6 15/16
12 48 6 15/16
14 48 6 15/16
16 48 6 15/16
18 48 6 15/16
20 48 6 15/16
24 48 8 1-3/16
30 48 8 1-3/16
30 60 8 1-3/16
sleeve mounted jib cranes diagram Chart 1B. Boom Data
STANDARD BOOM DATA
Boom
Height (W)
Beam Size Flange
Width (in)
6" W6@12#/ft. 4"
8.125" W8@18#/ft. 5-1/4"
10.33" W10@26#/ft. 5-3/4"
12.5" W12@35#/ft. 6-1/2"
16.125" W16@45#/ft. 7"
18" W18@50#/ft. 7-1/2"
21" W21@62#/ft. 8-1/4"
24.125" W24@84#/ft. 9"
Pricing and Dimensional Specifications - Click a Load Capacity Link Here
1/4 TON 1/2 TON 1 TON 1-1/2 TON 2 TON 3 TON 5 TON

FEATURES OF MOTORIZED CONTROL PACKAGE
insert and sleeve mounted jib cranes • Variable Frequency Drive (VFD) is standard.
The Variable Frequency Drive can be used in single or multiple speed
applications.
• Variable Frequency Drive provides the ultimate in load control.
The VFD provides the ultimate in load control and positioning from the
slowest possible creep speed up to maximum speed. The VFD is up to
25 times smoother than ballast resistor controls, does not produce
extensive heat, and enables precise starting and stopping.
• Easily adjustable speed control.
Through a simple keypad on the VFD, the acceleration rate,
deceleration rate and rotation speed can be adjusted to fit your application.
This allows you to customize the performance of the jib to your exact
requirements.
• Designed for indoor and outdoor use.
When being used outdoors, the cranes are designed to operate in
winds of 15 mph or less, based on a maximum load surface of 16 square
feet. Consult us for applications exceeding these standards.
The direct drive powers the rotation
of the Free Standing Crane. A speed
of 1/2 RPM is standard.
• Standard NEMA 4X Controls Enclosure.
insert and sleeve mounted jib cranes Standard controls enclosure meets the requirements for NEMA 3R,
12, 4 and 4X environments. Optional enclosures are available for other
environments.
• Low maintenance costs.
The VFD eliminates the need for magnetic reversing contractors,
reduces the number of wearable components in the panel, and reduces
long-term maintenance costs.
Pricing and Dimensional Specifications -
Click a Load Capacity Link Here
1/4 TON 1/2 TON 1 TON 1-1/2 TON 2 TON 3 TON 5 TON
Variable Speed Controls provide the
ultimate in jib crane rotation control form
creep speed to maximum speed.

STEP 3 - PLUMBING MAST
WARNING
Mast must be plumb to prevent boom from drifting.
PLUMBING MAST insert and sleeve mounted jib cranes
3.1 Drop plumb line (not included) from top of mast,
using fixture (not included) or equivalent (diagram 3A).
3.2 At point “A”, one (1”) inch below the top mast plate,
set plumb line a distance of three (3”) inches from the
surface of the mast pipe (diagram 3B).
3.3 At point “B”, five (5’) feet below point “A”
(approximately where rollers will contact mast pipe),
the distance between plumb line and the surface of
the mast pipe should also be three (3”) inches.
3.4 Repeat steps C & D every 60º around mast to
ensure mast is plumb throughout.
insert and sleeve mounted jib cranes clamp to pivot pin
Note: Be sure to fasten plumb line securely to plumb
fixture so that it will not move. Movement will result
in an inaccurate plumb measurement.
3.5 Once mast is plumb and grout
(FS300) has cured, fully tighten
anchor bolt hardware.
3.6 Verify mast is still plumb.
DO NOT USE A
LEVEL TO PLUMB
MAST
STEP 4 - HEAD INSTALLATION
TIP: Trunnion rollers should have full face contact with mast pipe when properly installed.
4.1 Wipe protective grease coating off
and/or remove tape from pivot pin.
insert and sleeve mounted jib cranes
4.2 Place and orient tapered roller bearing
inner race (cone) on the mast pivot pin
(diagram 4A).
4.3 Remove safety channel from head
assembly if it is bolted into place.
4.4 Place the head on the mast. Install V-ring seal
(shipped loose) over mast pivot pin and press against
weight bearing frame. Secure head by inserting the
safety retaining pin into the hole located in the
mast pivot pin. Ensure that the safety retaining pin
is centered to within 1/16” inside of the mast pivot
pin. Place 2 hose clamps (one on either side) over
each end of the safety retaining pin and slide them
inward until they come in contact with the mast
pivot pin (diagram 4B). Tighten both hose clamps
such that the safety retaining pin is locked into
place without the ability to slide sideways. Also
ensure that both hose clamps are identically
oriented on the pin and, once tightened, ensure the
clamp screws are facing downward.
Note: It is imperative that the safety retaining pin
is installed in the “centered” position to avoid a
possible interference with the threaded stud welded
to the weight bearing frame.
4.5 Reinstall the safety channel into the head if removed
in step 4.3.
insert and sleeve mounted jib cranes

Insert Mounted Jib Cranes, Sleeve Mounted Jib Cranes, Cranes, Articulating Jib Cranes, Gorbel Jib Cranes, Jib Cranes, Floor Mounted
Jib Cranes, Gorbel Cranes, Hoist, and Jib Booms from your source for material handling equipment.